•Operating frequency 433.92 MHz, with 4.5 millions of billions codes.
•Available in both 2-and 4 key version, Handy2 and Handy4, activating up to 3 channels (Handy2)
and 15 channels (Handy4).
•Also available in the uncoded programmable versions Handy2P and Handy4P.
•Fast programming by means of Fastprog

•Operating frequency 434.15 MHz and 868.30 MHz, with 4.5 millions of billions codes.
•Available in both 2-and 4 key version, Duetto2 and Duetto4, activating up to 3 channels (Duetto2) and 15 channels (Duetto4).
•Also available in the uncoded programmable versions Duetto2P and Duetto4P.
•Fast programming by means of Fastprog.

TSC-4
4-channel 433,92 MHz miniaturized transmitter serialized by V2.
Available in the Tsp-4 version, programmable by means of Prog2 or Winppcl.

TRC-4
4-channel 433,92 MHz miniaturized transmitter serialized by V2. Available in the Trp-4 version, programmable by means of Prog2 or Winppcl.

•Operating frequency 433.92 MHz. 1, 2, 4
programmable channels with three functions:
monostable, step by step and timer.
•Memory can store up to 240 codes.
•Also available in the 2-channel version PLUS, which
can store up to 1008 different codes
•Plug-in terminal board to programme without cutting the wire connection.
•Self-learning operation of the transmitters by radio.
•Sequential programming of the transmitters
•Rolling code mode
•Built-in aerial

•Operating frequencies 434.15 and 868.30 MHz.
•1 or 2 programmable channels with three functions: monostable, step by step and timer.
•Memory can store up to 240 codes (Concerto1, Concerto2).
•Also available in the 2-channel version called Concerto2P, which can store up to 1008 different codes.
•Plug-in terminal board to programme without cutting the wire connection.
•Self-learning operation of the transmitters by radio.
•Sequential programming of the transmitters.
•Rolling code mode.

RXP
•Modular receiver with display
•Possibility to select the output: monostable, step by step or timer
•Fast connector for plug-in memory modules
•3-digit display to simplify the programming
•Rolling code function
•Possibility to expand to 4 channels plugging-in the Mlr relay modules

MEM200 -allows to store up to 318 different codes
MEM1000 -allows to store up to 1000 different codes

MLR -Relay module to expand the Rxp receiver up to 4 channels

RXP2S220
•230V 2 channel receiver that can control loads up to 1500W
•The two relay outputs can be programmed with three functions: monostable, step-by-step and timer

PROG2
•Programming of blank transmitters with random codes
•Connecting memory modules and receivers in order to visualize, modify, erase (partially or completely) the codes stored
•Interfacing the Winppcl software

FASTPROG
•Fastprogrammer to serialize transmitters Handy and Duetto
•Must be used with Prog2